CLICK HERE for The Top-Rated & Best-Selling Health and Personal Care Products
Drywall Ceiling: How to Build It and Tips to Make the Job Easier
You have to keep in mind that drywall panels are huge, bulky, and can be very awkward to handle. If you prefer renting a drywall jack, then you will find that most home improvement centers will be able to provide you with it. The cable mechanisms on drywall jacks are not that difficult to operate and it will do a great job to hold the drywall secure as you attach it to the ceiling.
First off, you have to have the right tools and materials before you start the project. In addition to drywall jacks, you will need a hammer, a drill with a screwdriver bit and you will obviously need screws and nails to fix the drywall in place. It is also important for you to measure your ceiling twice in order for you to determine how many drywall panels you need for the entire project. And, get a little extra drywall panels in case you make mistakes when attaching the drywall on to your ceiling.
The first thing that you have to do when attaching drywall ceilings is to mark the joists. You have to find the boards, which will function as the ceiling joists. You can do this by tapping along the wall studs with a hammer and at the same time, following up the wall to the ceiling. Then, you have to mark where the boards are located with a pencil. This is basically where you will need to attach the drywall on and it will make it easier for you to find them than finding them while you are screwing or nailing the drywalls on.
You also have to measure where the light fixture goes on the drywall. This is basically where you have to cut out a hole in order to accommodate the area of the ceiling.
After marking the joists, the next step is the hardest step that you will ever do when attaching drywall ceilings. This part is where you actually build a drywall ceiling. If you donít have someone to help you out, you can always use a drywall jack to hold the drywall panel in place as you attach it on the ceiling.
When nailing the panel on to the joist, you have to make sure that you do it half an inch from the edges. This will prevent the edges to crack or split. Do this on ever corner of the drywall. After doing this, itís time for you to remove the jack and hammer in nails at six or seven inch intervals around each panel.
Try to countersink the nails or screws on the panels as this will allow you to cover up the heads of the nails or screws with compound.
Learning how to build a drywall ceiling is not that difficult. But, it will require you to exert a lot of hard work and effort in order for you to get the job done.
Selected ArticlesDrywall Repair: How To Properly Repair Your Water Damaged Drywall
Drywall Finishing: Great Tips To Help You Properly Finish Your Drywall
How And Why Should You Remove Drywall Mold
Do It Yourself Drywall Projects: How To Properly Paint Your Drywall
Techniques To Properly Finish Drywalls
Tips For Fixing Drywall Water Damage
Step By Step Instructions On How To Properly Finish Your Drywall Seams
The Basics Techniques Of Installing Drywall Panels In Your Home
Great Tips For Finishing Your Drywall
Easy Steps To Applying Texture On Your Drywall
Drywall Water Damage: Helpful And Effective Ways To Repair Your Drywall
Drywall Repair Tips: How To Repair Popped Nails In Your Drywall
The Proper Way To Paint Your Drywall
Tips On How To Remove Drywall Mold Properly
How To Repair Popped Nails In Your Drywall
Get Excellent Results When Finishing Your Drywall
The Proper Way To Patch Your Drywall
Repairing Drywall Water Damage: Restoring Your Drywall
Effective Ways To Fix A Water Damaged Drywall
Drywall Installation: Doing It Properly To Avoid Hassles
Drywall Ceiling: How To Build It And Tips To Make The Job Easier
How To Apply Texture On Your Drywall
The Drywall: Tips To Properly Install Your Drywall
Great Tips For Installing Drywall Properly